The PTFE tube as a Black Electroplated Stainless Outer Cover that is durable and resistant to expansion. The Raceworks 230 Series Hose is the best option for use on fuel systems as it won’t allow the permeation of fuel smell, and has the highest pressure and temperature rating in the range of Raceworks hoses. All Raceworks products come with a 2 year warranty.
Smooth Bore PTFE hose offers low volumetric expansion at maximum operating pressure making it ideal for pressure systems such as brake, clutch, power steering, gearbox and suspension hydraulics. Low expansion provides a more positive brake pedal with less travel. It is able to operate at high pressure and temperature while remaining robust and flexible.
EPDM Rubber covered hoses are designed for the chemical industry, foodstuff, pharmaceutical and cosmetic industry. Tube : Inner tube of PFA or PTFE Reinforcement : Multi-layered rubber, polyester cord, antistatic copper wire and a double helix wire for support. Cover : Smooth EPDM rubber Fittings : Male, , flanged, Triclover and PTFE flared / encapsulated fittings available in all the
Plain PTFE Hose. The hose are good resistance against all chemicals, acids and caustic solutions of any concentration. Exceptions : Liquid Alkali metals and fluoride compounds. From - 73ºC to 232ºC max for fluids, gases. Inert to all aircraft hydraulic fluids, fuels, lubricants, coolants, and water systems, Non-toxic, odorless and tasteless.
ptfe hose. custom sizes and other coupling capabilities available on all hoses. to place an order or speak with a crp representative, call 526-4066. minimum dynamic minimum rp partc # of nominal i.d. nominal o.d. bend radius working burst weight maximum temperature nuer colors braids inches (mm) inches (mm)
BEND RADIUS WEIGHT CRIMP DIE PART NO. 919J PTFE Hose Silicone Jacketed PTFE Hose 919B PTFE Hose Static-Dissipative Hose INCHES/HG INCHES MM INCHES MM INCHES MM PSI MPA INCHES MM LBS/FT KG/M 919B-5 28 1/4 6 3/8 10 .030 .762 3000 20.7 3.0 76 0.086 0.13 80C-T05N 919B-6 28 5/16 8 7/16 11 .030 .762 2500 17.2 4.0 102 0.103 0.15 80C-T06N
SAE 100R14 Type A PTFE hydraulic hose consists polytetrafluorethylene (PTFE) inner tube and 303×× series stainless steel wire reinforced cover. PTFE tube is ideal for transferring super high and low temperature hydraulic fluids within -65°F to +400°F. Stainless steel wire braid will not be affected harsh environments including damp environment, oils, chemicals, abrasions and all weathers
P.T.F.E hose has excellent temperature characteristics both in high and low temperature, excellent chemical resistance, non-contamination properties, low co-efficient of friction and resists deterioration. Therefore the hose is used generally in appliions where all …
24/10/2019· The minimum bend radius is measured from the inside edge of the hose to the centerline of the bend. One way to check the bend radius of the hose is with a template. Cut a piece of stiff material to the minimum bend radius, hold it against the inside of the bend. If the hose bend is the same size or larger than the radius on the template, the bend is okay. If not, the radius is too small. …
The Parker 939/939B series convoluted PTFE hoses feature superior flexibility and kink resistance for successful operation in chemical transfer, high temperature hydraulics, and hose appliions that require tight routings. In addition, the flexible capabilities of the hose allow for an improved bend radius than a 919/919B hose for simplified
Min. Bend Radius Working Pressure Burst Pressure inch mm mm mm kPa bar kPa bar PTFE-UHP-06 1/4’’ 6.20 12.30 38 47500 475 190000 1900 PTFE-UHP-08 5/16’’ 8.10 14.20 47 45000 450 180000 1800 PTFE-UHP-10 3/8’’ 9.50 16.00 64 43000 430 175000 1750 PTFE-UHP-12 1/2’’ 12.70 19.50 74 42500 425 170000 1700 PTFE-UHP-15 5/8’’ 15.10 22.00
P.T.F.E hose PH 179 has an excellent temperature characteristics both in high and low temperature, excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration. Therefore the hose is used generally in appliions where all are one of the above properties is the main criteria. Specifiions of PTFE Hose
6/3/2018· Metline is a manufacturer and professional supplier of PTFE (Teflon) Hose with Nipple or Pipe End, 90 Degree Bend, Elbow as End Connections. We can offer PTFE hose with Nipple or Pipe End, 90 Degree Bend, Elbow in a variety of configurations such as Smooth Bore or Convoluted Type, with stainless steel 304 or stainless steel 316 wire braiding.
PTFE (Polytetrafluoroethylene) a fluorocarbon-based polymer, is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE tubing can be used in a wide variety of appliions due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, gas and vapor
Raceworks 240 Series Black Nylon Braided PTFE hose is constructed from a PTFE inner tube that is compatible with all fuels, oils, nitrous including brake and clutch fluids. The PTFE tube has a black lightweight outer cover that is durable, and resistant to abrasion and expansion. The Raceworks 220 Series Hose is the best option for use on fuel systems as it won’t allow the permeation of fuel
• for Bend Radius Page 23 • for products is that Aflex is the only PTFE hose company in the world to carry out all the hose design and manufacturing operations in house, from raw materials to finished products, at Aflex Hose plants in Yorkshire (UK) and Pennsylvania (USA). • PTFE powder is extruded into tube and convoluted. • Stainless steel wire is wound and braided onto the tube
AE313 hose overlaid with a braided cover of tough polyester yarn Operating Temperature Range: -65ºF to +300ºF (-54ºC to +150ºC) Dash Size O.D T. ube Size inches (mm) Hose I.D. Min. inches (mm) Hose O.D. Max. inches (mm) Maximum Operating Pressure psi (bar) Proof Pressure psi (bar) Minimum Burst Pressure psi (bar) Minimum Bend Radius inches
Thorburn’s PTFE hose asselies are designed and manufactured to the highest quality standards to provide safe and cost effective solutions. Thorburn offers fast re-sponse assely capability, using ad-vanced hose assely and testing tech-niques to ensure rapid delivery service. incredible 2 X ID Bend Radius
HOSE DESIGN The only issue with PTFE as a hose lining material is the best way it can be integrated in to the hose design. This is where Aflex Hose have a proven record of success over the last 30 years. Section from a PTFE Molecule, 16 Angstrom Units long Fluorine Atom Carb on At m PTFE – THE OPTIMUM CHOICE FOR HOSE LININGS 03
PTFE Teflon Convoluted Hose OD 22.352 mm Long 1m / Custom. This PTFE tubing delivers superior performance when it comes to managing cables in harsh environments. High heat, abrasion, moisture, and chemicals are no match. Choose between standard for straight runs and extra flexible for more complex routing. This tubing looks especially great
27/7/2020· D = 21.4 mm; Bending Radius (R) (Fixed) = 4D = 4 x 21.4 mm = 85.6 mm. In addition to the common cable types above, we have summarized in a one-page table form, the bending radius for multiple cable types, including flexible, control, instrument, thermocouple, bus, welding, HDPE and solar cables. Feel free to download the table reference for your use. Please note that these figures are not
MIN. BEND RADIUS (mm) (In.) (mm) (In.) (mm) (psi) (Bar) (psi) (Bar) (mm) (In.) PTFE HOSE-02 1.00 1/8 3.00 0.24 6.20 3,260 225 13,040 900 40 1.60 PTFE HOSE-04 0.70 1/4 6.00 0.35 8.80 2,610 180 10,440 720 75 3.00 PTFE HOSE-06 0.70 3/8 9.50 0.48 12.1 2,390 165 9,560 660 125 5.00 PTFE HOSE-08 0.75 1/2 12.5 0.64 16.2 1,740 120 6,960 480 165 6.60
Minimum bending radius. Minimum bending radius of PTFE Thin Wall Tubing depends on many factors; most important are: dimension, working temperature, applied pressure and pressure fluctuations; of lesser importance the nature of fluid conveyed. Roughly the minimum bending radius (at 20°C-68°F) depends on OD and wall thickness. If wall thickness is 1 mm it can be considered: Rmin mm = 9 to 11
- For Bend Radius Page 16 - For Abrasion The Hyperline name is applied to Aflex PTFE hose products which have an oversize bore, to enable assely with standard Hydraulic End Fittings. In most cases, these sizes are the same as the conventional “dash” hose size range, as indied in the specifiions. SPECIFIIONS and SIZE RANGES - Pg''s 5 & 6 SW, HW & MW Single Braid (SB) Hose
13/11/2019· The minimum bend radius of hose will be different based on numerous factors. For instance, the three layers a hydraulic hose is constructed of – the core, reinforcement, and cover – will be important in determining the minimum diameter at which it can bend. Whether the hose has spirals or braids and how many layers of wire it features can also impact its bend radius. As an example of how
12 rows· Nominal Hose Bore Size Bore Inside Convolutions Corroflon Grade (Braid & Cover) PTFE Liner Tube Wall Thickness O/D of Tube, Braid or Rubber Minimum Bend Radius * Maximum Continuous Hose Length; in mm in mm in mm in mm in mm Feet Metres; 1 / 2: 15: 0.440: 11.2: TO SS PB SS,RC RC,SI KYB: 0.05: 1.4: 0.63 0.70 0.80 0.90 0.90 0.76: 16.1 17.8 20.4 22
Construction: A helically convoluted ''PTFE'' (polytetrafluorethylene) inner tube, medium wall, or anti-static, with an outer cover of AISI304 high tensile stainless steel braid. Unbraided hose, along with AISI316 and polypropylene braids are also available. Properties: - Resistant to virtually all chemicals, except molten alkali metals or halogens at elevated temperatures.
Size Hose I.D. Hose O.D. Min. Bend Radius Max. Working Pressure at 70 oF (21 C) Burst Pressure at 70 oF (21 C) Weight Lbs / Ft Inch DN Inch MM Inch MM Inch MM PSIG BAR PSIG BAR 1/2 15 0.510 13 0.970 24.6 0.500 12.7 785 54.1 3140 216.5 0.36 3/4 20 0.760 19.3 1.250 31.7 0.750 19 570 39.3 2280 157.2 0.49 1 25 1.025 26 1.560 39.6 1.000 25.4 350 24.1 1400 96.5 0.63 1-1/2 40 1.525 38.7 2.240 …
Reduced, smooth bore PTFE hose Non-conductive (non-dissipating) PTFE hose r Part nuer Hose ID Hose OD Working pressure Minimun burst Minimum bend radius mm in mm in bar psi bar psi mm in EN-4TW 4.80 0.19 7.90 0.31 207 3,000 828 12,000 50 2.0 EN-5TW 6.40 0.25 9.80 0.39 207 3,000 828 12,000 75 3.0 EN-6TW 8.00 0.31 11.60 0.46 172 2,500 688